?1? Test result 1: Detection range: µ g/L level to mg/L level -+2 Detection limit: ? 0.001 µ g/mL (calculated as Cl), ? 0.005 µ g/mL (calculated as Li) 33 Linear range: 10-4 Linear correlation coefficient: ? 0.999 (calculated as Cl and Li+) 5 Baseline noise: ? 1.0% FS6 Baseline drift: ? ± 3.0% FS/30min (II) Infusion pump * 1 Type: Parallel double plunger reciprocating pump, microprocessor controlled stroke, adjustable speed * 2 Structure: Chemical inertness, Non metallic PEEK material pump head and flow path 3PH: 0-144 control mode: fully controlled through Ace workstation software or front panel 5 operating pressure: maximum 35Mpa (5000psi) * 6 pump flow range: 0.001mL/min-15.0mL/min* 7 Flow repeatability: ? 0.1% RSD8 Flow accuracy: ± 0.5% * 9 Plunger cleaning: dual plunger continuous automatic cleaning 10 Overpressure protection: upper limit 0.1-35Mpa, in increments of one unit, exceeding the upper limit will automatically stop the pump 11 Online degassing (optional): dual channel optional, automatic online degassing (III) Temperature control conductivity detector 1 Type: digital signal control microprocessor 2 Conductivity cell drive: 10kHz3 Measurement range: 0-15000 ? S4 resolution: 0.0275nS/cm5 conductivity cell temperature control range: room temperature -60 ?, set by the user * 6 conductivity cell material: PEEK7 conductivity cell volume:<1 µ L (4) suppressor 1 inhibition mode: self regeneration cycle 2 inhibition amount: anionic 100mmol/L NaOH, cationic 100mmol/LMSA3 suppressor dead body volume:<50 ? L0-300mA in increments of 1mA

• Company Details
• Send Enquiry
• Add to My Favourite Products